25
3Select the location you want to massage ( ).
You can select an action combined with “FULL ROLL” by pressing the button.
Display
4Select the massage action ( ).
By pushing on the body part again, the massage action will toggle down from ultra knead to tap. Shoulder massage will
toggle all the way to grasp.
5Press the button to start the action.
The massage will start after the body scanning.
Body scanning for Manual Operation
For the Neck/Shoulder: Normal body scanning.
Back/Lower back: Simple body scanning. (The massage heads will not come up to the shoulder position.)
To change an action in the middle of a massage
Select your favorite one again in Steps 3 to 5.
Press the button within approximately 30 seconds after reselecting an action in Step 3, otherwise the reselection will
be cancelled automatically.
Adding tapping, regional rolling, auto width
Press the following buttons ( ).
These actions cannot be selected independently.
These actions cannot be added to “GRASP”.
•
•
•
•
EP30006US.indb 25 2007/06/11 21:10:27