English
3 Insert the tip of the outer blade into your nostril or aural cavity.
•Insert it slowly so as not to injure your nostril or aural cavity.
4 Cut the nose hair and ear hair by moving the appliance.
•Move it slowly so as not to injure your nostril or aural cavity.
•Cut only the nostril hair around the entrance using the tip (approx. 5 mm) of the outer blade (metallic part).
•Some trimmings may remain inside your nostril or aural cavity after cutting, so remove them using a tissue or similar.
•The outer blade surface may get a little warm during use, but performance will not be affected.
Outlining your eyebrows, moustache, or beard
You cannot trim the hair to length with this appliance. It is not suitable for the hair below 1/64" (0.5 mm).
1 Check that the wash switch |
|
|
ring is not set to “ ”. |
|
|
2 Slide the power switch to | 1 |
|
the “1” position to turn the | 2 | |
appliance on. |
|
3 Place the tip of the outer blade against the hair (eyebrows, moustache, or beard) you would like to cut.
• Press the outer blade softly so as not to injure your skin.
