Using the carrying holder
The shaver can be kept vertically or horizontally. When transporting the shaver, you can use the carrying holder to protect the outer foil and prevent erroneous operation of the switch.
••When transporting the shaver, be sure to clean off any shavings before attaching the carrying holder.
Attaching the carrying holder
Attach the carrying holder as illustrated.
••Check that all four protrusions on the shaver are inserted securely.
Removing the carrying holder
Remove the carrying holder while pressing down on both sides.
Charge
Charging the shaver
Perform the following steps to charge the shaver if it seems to lose speed.
You can charge the shaver with the carrying holder attached.
1 Turn off the shaver and insert |
| |
it in the AC adaptor until it |
| |
clicks as illustrated. | 2 | |
••Wipe off any water droplets on the side | ||
1 | ||
terminals. | ||
••If you charge the shaver with the power |
|
switch turned on, it will start working when you remove the shaver from the AC adaptor.
2 Put the plug into a household outlet.
The charge indicator lamp glows red.
••Charging is completed after approx. 15 hours.
••When charging the shaver for the first time, or when it has not been in use for more than 6 months, the charge indicator lamp may not glow for a few minutes, or the operating time may shorten. Please charge it for more than 23 hours in such cases.
••If the shape of the plug does not fit the power outlet, use an attachment plug adaptor with proper configuration.
3 Disconnect the plug after charging is complete.
••Charging the battery for more than 15 hours will not affect battery performance.
••Recommended ambient temperature for charging is 0 ‑ 35 °C (32 ‑ 95 °F). The battery may not charge under extreme low or high temperatures.
English
5
