S P E C F I L E
Network Board for DLP™ Projector
ET-MD77NT
This board is designed for use with the DLP™ projectors. It enables remote control of the projector and transmission of still images to the projector from a PC on a LAN via a Web browser.
|
| NOTE: Please use the module only on the specified Panasonic DLP™ projector. | ||
Specifications |
|
|
| |
Power supply: |
| Provided from the DLP™ projector | ||
Power consumption: | Projector power consumption increases approximately 5 W | |||
Terminals: | LAN: | |||
Dimensions (W x H x D): | 204 | x 32 x 214 mm | ||
Weight: |
| 280 | g (10.2 | lbs.) |
Operating temperature: | 0°C – 40°C |
| ||
Operating humidity: | 10% – 80% | (no condensation) |
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
DLP and DLP logo are trademarks of Texas Instruments.
Dimensions
unit: mm
(Dimensions given in inches are approximate.)
214 |
|
| (8 |
32 |
|
| (1 |
204
Note: This illustration is not drawn to scale.
As of December 2006 |
| 1 |
|