Panasonic ET-MD77NT specifications HD-SDI Input Board for the PT-DW10000, ET-MD100SD4, Dimensions

S P E C F I L E

HD-SDI Input Board for the PT-DW10000

ET-MD100SD4

This board is designed for use with the DLP™ projector PT-DW10000. It enables the input of a HD-SDI (SMPTE 292M) and dual link HD-SDI (SMPTE 372M). Remote control of the projector is also possible from an external com- puter connected via LAN.

		NOTE: Please use the module only on the Panasonic DLP™ projector PT-DW10000.
Specifications
Power supply:		Provided from the DLP™ projector
Power consumption:		Projector power consumption increases approximately 10 W
Terminals:	Link A/Link B input:	BNC x 1 for each
		SD-SDI signal (YCBCR 4:2:2 10 bit)
		SMPTE 259M compliant: 480i, 576i
		Single link HD-SDI signal (YCBCR 4:2:2 10 bit)
		SMPTE 292M compiant: 1720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p,
		1080/24p, 1080/24sF, 1080/30p
		Dual link HD-SDI signal (RGB 4:4:4 12 bit/10 bit)
		SMPTE 372M compiant: 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/25p,
		1920 x 1080/24p, 1920 x 1080/24sF, 1920 x 1080/30p
		Dual link HD-SDI signal (X´Y´Z´ 4:4:4 12 bit)
		2048 x 1080/24p, 2048 x 1080/24sF
Dimensions (W x H x D):		204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
Weight:		250 g (8.8 oz)
Operating temperature:		0°C – 45°C (32°F – 113°F)
Operating humidity:		10% – 80% (no condensation)

NOTE: Use connection cables of 5CFB or higher (ex. 5CFB, 7CFB, 5CFTX, etc.).

Dimensions

214	-7/16˝)
	(8

32	-1/4˝)
	(1

204

(8-1/32˝)

unit : mm (inch)

NOTE: This illustration is not drawn to scale.

Weights and dimensions shown are approximate. Specifications subject to change without notice. DLP and the DLP logo are trademarks of Texas Instruments. All other trademarks are the property of their respective trademark owners.

As of February 2008 < 1 >