Panasonic ET-MD77NT S P E C F I L E HD-SDI/SD-SDI Board for DLP Projector ET-MD77SD3, Dimensions

S P E C F I L E

HD-SDI/SD-SDI Board for DLP™ Projector ET-MD77SD3

This board is designed for use with the DLP™ projectors. It enables the input of a HD digital serial component signal (SMPTE292M-compliant). Remote control of the projector is also possible from an external computer connected via LAN.

		NOTE: Please use the module only on the specified Panasonic DLP™ projector.
Specifications
Power supply:		Provided from the DLP™ projector
Power consumption:		Projector power consumption increases approximately 10 W
Terminals:	Serial input:	BNC x 1
		4:2:2 digital serial component signal: SMPTE 259M compliant,
		480i, 576i
		HD digital serial component signal: SMPTE 292M compiant,
		720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i,
		1080/25p, 1080/24p, 1080/24sF, 1080/30p
	Serial output:	BNC x 1, active through
	LAN:	RJ-45 x 1, 10Base-T/100Base-TX for network connection
Dimensions (W x H x D):		204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
Weight:		290 g (10.2 lbs.)
Operating temperature:		0°C – 40°C
Operating humidity:		10% – 80% (no condensation)

NOTE: Use connection cables of 5CFB or higher (ex. 5CFB, 7CFB, 5CFTX, etc.).

720/50p signals can be input only when this unit is used with the PT-DW10000, PT-D10000, PT-DW7000 or PT-D7700.

Weights and dimensions shown are approximate.

Specifications subject to change without notice.

DLP and DLP logo are trademarks of Texas Instruments.

Dimensions

unit: mm

(Dimensions given in inches are approximate.)

214	-7/16˝)
	(8

32	-1/4˝)
	(1

204
(8-1/32˝)	Note: This illustration is not drawn to scale.

As of December 2006 4