Panasonic ET-MD77NT ET-MD77SD1, SD-SDI Board for DLP Projector, S P E C F I L E, Specifications

S P E C F I L E

SD-SDI Board for DLP™ Projector

ET-MD77SD1

This board is designed for use with the DLP™ projectors. It enables the input of a 4:2:2 digital serial component signal (SMPTE259M-compliant). Remote control of the projector is also possible from an external computer connected via LAN.

		NOTE: Please use the module only on the specified Panasonic DLP™ projector.
Specifications
Power supply:		Provided from the DLP™ projector
Power consumption:		Projector power consumption increases approximately 5 W
Terminals:	Serial input:	BNC x 1, 4:2:2 digital serial component signal, SMPTE 259M compliant,
		480i, 576i
	Serial output:	BNC x 1, active through
	LAN:	RJ-45 x 1, 10Base-T/100Base-TX for network connection
Dimensions (W x H x D):		204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
Weight:		290 g (10.2 lbs.)
Operating temperature:		0°C – 40°C
Operating humidity:		10% – 80% (no condensation)

Weights and dimensions shown are approximate.

Specifications subject to change without notice.

DLP and DLP logo are trademarks of Texas Instruments.

Dimensions

unit: mm

(Dimensions given in inches are approximate.)

214	-7/16˝)
	(8

32	-1/4˝)
	(1

204

(8-1/32˝)

Note: This illustration is not drawn to scale.

As of December 2006 3