Panasonic EX-10 Series manual Specifications, 150 mm 5.906 in, 500 mm 19.685 in

EX-10

SPECIFICATIONS

	Type
Model	Light-ON
No.
Item (Note 1)	Dark-ON

Sensing range

Min. sensing object

Hysteresis

Repeatability

(perpendicular to sensing axis)

Supply voltage

Current consumption

Output

Utilization category

Short-circuit protection

Response time

Operation indicator

Incident beam indicator

Stability indicator

	Pollution degree
resistance	Protection
	Ambient temperature
	Ambient humidity
Environmental	Ambient illuminance
	EMC
	Voltage withstandability
	Insulation resistance
	Vibration resistance
	Shock resistance

Emitting element

Material

Cable (Note 4)

Cable extension

Weight

Accessories

Thru-beam

Convergent reflective

Thru-beam • with operation mode switch on bifurcation

(Diffused beam type)

Front sensing

Side sensing

Front sensing

Side sensing

Front sensing

Front sensing

Front sensing

Side sensing

Front sensing

Side sensing

EX-11A(-PN)

EX-11EA(-PN)

EX-13A(-PN)

EX-13EA(-PN)

EX-19A(-PN)

EX-14A(-PN)

EX-15

EX-15E

EX-17

EX-17E

EX-11B(-PN)

EX-11EB(-PN)

EX-13B(-PN)

EX-13EB(-PN)

EX-19B(-PN)

EX-14B(-PN)

(Note 2)

(Note 2)

(Note 2)

(Note 2)

2 to 25 mm 0.079 to

150 mm 5.906 in

500 mm 19.685 in

1 m 3.281 ft

0.984 in (Note 3)

150 mm 5.906 in

500 mm 19.685 in

(Conv. point:10 mm 0.394 in)

"1 mm "0.039 in opaque object

"2 mm "0.079 in opaque object

"2 mm "0.079 in

"0.1 mm "0.004 in

"1 mm "0.039 in opaque object

"2 mm "0.079 in opaque object

Setting distance between

Setting distance between

opaque object

copper wire

Setting distance between

Setting distance between

Setting distance between

emitter and receiver:

emitter and receiver:

Setting distance:

emitter and receiver:

emitter and receiver:

emitter and receiver:

(150 mm 5.906 in

)

(500 mm 19.685 in

)

)

(10 mm 0.394 in )

(150 mm 5.906 in

)

(500 mm 19.685 in

)

(1 m 3.281 ft

15 % or less of

operation distance

0.05 mm 0.002 in or less

0.1 mm 0.004 in

0.05 mm 0.002 in or less

or less

12 to 24 V DC10 % Ripple P-P 10 % or less

Emitter: 10 mA or less, Receiver: 15 mA or less

20 mA or less

30 mA or less

<NPN output type>

NPN open-collector transistor

NPN open-collector transistor

• Maximum sink current: 50 mA

• Maximum sink current: 100 mA

• Applied voltage: 30 V DC or less (between output and 0 V)

• Applied voltage: 30 V DC or less

• Residual voltage: 1 V or less (at 50 mA sink current)

(between output and 0 V)

0.4 V or less (at 16 mA sink current)

• Residual voltage: 1.5 V or less

<PNP output type>

(at 100 mA sink current)

PNP open-collector transistor

0.4 V or less

• Maximum source current: 50 mA

(at 16 mA sink current)

• Applied voltage: 30 V DC or less (between output andV)

•Residual voltage: 1 V or less (at 50 mA source current)

0.4V or less (at 16 mA source current)

DC-12 or DC-13

Incorporated

0.5 ms or less

Red LED (lights up when the output is ON)	Orange LED (lights up when the output is ON),
	located on the bifurcation
	Red LED (lights up under light received condition),
	located on the receiver
Green LED (lights up under stable light received condition or	Green LED (lights up under stable light received condition
stable dark condition)	or stable dark condition), located on the receiver
3 (Industrial environment)

IP67 (IEC)

25 to55 C 13 to131 F (No dew condensation or icing allowed), Storage:30 to70 C 22 to158 F

35 to 85 % RH, Storage: 35 to 85 % RH

Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face

EN 50081-2, EN 50082-2, EN 60947-5-2

1,000 V AC for one min. between all supply terminals connected together and enclosure

20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure

10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each

500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each

Red LED (modulated)

Enclosure: Polyethylene terephthalate		Enclosure: Polyethylene terephthalate
Lens: Polyalylate		Lens: Polyalylate, Bifurcation: Polyalylate
0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long		0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifur-
		cation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable		Extension up to total 100 m 328.084 ft is
(thru-beam type: emitter and receiver).		possible with 0.3 mm2, or more, cable.
Emitter: 20 g approx., Receiver: 20 g approx.	20 g approx.	55 g approx.
Mounting screws: 1 set	Mounting screws:	Mounting screws: 1 set, Adjusting screwdriver: 1 pc.
	1 set

Notes: 1) Model Nos. having the suffix ‘-PN’ are PNP output type.

2)Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).

3)The sensing range of convergent reflective type sensor is specified for white non-glossy paper (50
50 mm 1.969
1.969 in) as the object.

4)The flexible cable type (model Nos. having suffix ‘-R’) has a 0.1 mm2 3-core (thru-beam type emitter : 2-core) flexible cabtyre cable, 2 m 6.562 ft long.

0 8 / 2 0 0 5 231