Panasonic EX-10 Series manual Options, Sensor mounting bracket, Slit mask, Sensor checker

EX-10

OPTIONS

Designation	Model No.		Description
	MS-EX10-1	Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]
		(The thru-beam type sensor needs two brackets.)
	MS-EX10-2	Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]
		(The thru-beam type sensor needs two brackets.)
Sensor	MS-EX10-3	L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]
		(The thru-beam type sensor needs two brackets.)
mounting
bracket	MS-EX10-11	Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)]
		(The thru-beam type sensor needs two brackets.)
	MS-EX10-12	Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)]
		(The thru-beam type sensor needs two brackets.)
	MS-EX10-13	L-shaped mounting bracket [Stainless steel (SUS304)]
		(The thru-beam type sensor needs two brackets.)
			 Sensing range: 600 mm 23.622 in [EX-19]
		Slit on one side	250 mm 9.843 in [EX-13, EX-17]
	OS-EX10-12		 Min. sensing object: "2 mm "0.079 in
	(Slit size "1.2 mm "0.047 in)
			 Sensing range: 400 mm 15.748 in [EX-19]
		Slit on both sides	200 mm 7.874 in [EX-13, EX-17]
			 Min. sensing object: "1.2 mm "0.047 in
			 Sensing range: 800 mm 31.496 in [EX-19]
		Slit on one side	350 mm 13.780 in [EX-13]
Slit mask	OS-EX10-15		 Min. sensing object: "2 mm "0.079 in
	(Slit size "1.5 mm "0.059 in)
			 Sensing range: 500 mm 19.685 in [EX-19]
		Slit on both sides	300 mm 11.811 in [EX-13]
			 Min. sensing object: "1.5 mm "0.059 in
		Slit on one side	 Sensing range: 250 mm 9.843 in [EX-13E, EX-17E]
	OS-EX10E-12		 Min. sensing object: "2 mm "0.079 in
	(Slit size "1.2 mm "0.047 in)
		Slit on both sides	 Sensing range: 200 mm 7.874 in [EX-13E, EX-17E]
			 Min. sensing object: "1.2 mm "0.047 in
Sensor checker	CHX-SC2	It is useful for beam alignment of thru-beam type sensors.
		The optimum receiver position is given by indicators, as
(Note)
		well as an audio signal.
Mounting screw	MS-M2	Mounting screws with washers (50 pcs. lot). It can mount
		securely as it is spring washer attached.

Sensor mounting bracket

• MS-EX10-1 • MS-EX10-11

Material: Cold rolled carbon	Material: Stainless steel (SUS304)
steel (SPCC)	Two M2 (length 4 mm 0.157 in)
(Uni-chrome plated)	pan head screws [stainless steel
Two M2 (length 4 mm 0.157 in)	(SUS304)] are attached.
pan head screws are attached.
• MS-EX10-2	• MS-EX10-12

Material: Cold rolled carbon		Material: Stainless steel (SUS304)
steel (SPCC)		Two M2 (length 8 mm 0.315 in)
(Uni-chrome plated)		pan head screws [stainless steel
Two M2 (length 8 mm 0.315 in)		(SUS304)] are attached.
pan head screws are attached.
• MS-EX10-3	• MS-EX10-13

Material: Cold rolled carbon	Material: Stainless steel (SUS304)
steel (SPCC)	Two M2 (length 4 mm 0.157 in)
(Uni-chrome plated)	pan head screws [stainless steel
Two M2 (length 4 mm 0.157 in)	(SUS304)] and two M2 (length
pan head screws, and two	8 mm 0.315 in) pan head screws
M2 (length 8 mm 0.315 in)	[stainless steel (SUS304)] are
pan head screws are attached.	attached.

Slit mask

• OS-EX10-12	• OS-EX10E-12
• OS-EX10-15

Example of mounting (OS-EX10E-12)

Tighten along with the sensor mounting bracket.

Sensor checker

•CHX-SC2

POWER

C	H
LEVEL

X -
S	C	2

Sensor checker

230 08/2005