Panasonic EY6803 operating instructions Guideline Table, Battery Charger

GUIDELINE TABLE

•Select the torque for fastening screws with the clutch handle.

•Guide for the selection of torque

Depending on the job, adjustments are possible in five levels by approximately 1 Nm (10 kgf-cm) increments.

			Guide Depending on Material
	Setting	Torque	Concrete		Block
			(A)	(B)	(A)	(B)
	1	Approximately 1.5 Nm (15 kgf-cm)
Fastening	2	Approximately 2.5 Nm (25 kgf-cm)
Screws	3	Approximately 3.4 Nm (35 kgf-cm)
	4	Approximately 4.4 Nm (45 kgf-cm)
	5	Approximately 5.4 Nm (55 kgf-cm)
Drilling	(Drill Mark)	Approximately 8.3 Nm (85 kgf-cm)	Drilling holes in metal
Holes

(A)For fastening screws into plastic anchor which requires dia. 6.0 mm (1/4") prehole in the concrete.

(B)For directly fastening screws into concrete (like topcon) with dia. 3.5 mm (1/8") prehole.

NOTE: This is only a rough guide. Required torque is different depending on the shape, material, and application of the screws.

Set according to the work environment of the site.

BATTERY PACK (EY9201 is included with shipment. )
Model	EY9201	EY9200		EY9106	EY9101	EY9001, EY9006
Battery voltage			12 V DC (1.2 V × 10 cells)
Storage battery	Ni-MH Battery				Ni-Cd Battery
Capacity	3.5 Ah	3.0 Ah		2.0 Ah	1.7 Ah	1.2 Ah
BATTERY CHARGER
Model					EY0110
Rating			See the rating plate on the bottom of the charger.
Weight				0.78 kg (1.72 lbs)
Charging time				55 minutes (EY9201)

NOTE:

•Do not charge “Y” type Ni-Cd battery packs.

•For applicable battery packs to this charger, see the label on the charger or the latest general catalog.

- 10 -

EY6803(EU).indb 10

2006/04/10 9:41:36