[Battery Pack]
For Appropriate Use of Bat tery pack
Liion Battery pack (EY9L10)
•For optimum battery life, store the Li- ion battery pack following use without charging it.
•The ambient temperature range is between 0°C (3°F) and 40°C (104°F). If the battery pack is used when the battery temperature is below 0°C (3°F), the tool may fail to function properly.
•When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals togeth- er may cause sparks, burns or a fire.
•When operating the battery pack, make sure the work place is well ven- tilated.
Battery Pack Life
The rechargeable batteries have a lim- ited life. If the operation time becomes extremely short after recharging, replace the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Liion Battery Pack, EY9L10
A
[Battery Charger]
Charging
Common Cautions for the Li ion/NiCd Battery Pack
NOTE:
•When a cold battery (of about 0°C or less) is to be charged in a warm room, leave the battery in the room for at least one hour and charge it when it has warmed up to room temperature. (Failing to do so may result in less than a full charge.)
•Cool down the charger when charging more than two battery packs consecu- tively.
•Do not insert your fingers into con- tact hole, when holding charger or any other occasions.
CAUTION:
To prevent the risk of fire or damage to the battery charger.
•Do not use power source from an engine generator.
•Do not cover vent holes on the charger and the battery pack.
•Unplug the charger when not in use.
Liion Battery Pack
NOTE:
Your battery pack is not fully charg- ed at the time of purchase. Be sure to charge the battery before use.
Battery charger (EY0L10)
1. Plug the charger into the AC outlet.
NOTE:
Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety.
.Slide the battery dock cover back to allow insertion of the
●Verify that the cover is locked se curely in place.
3.Insert the battery pack firmly into the charger.
- 9 -