Panasonic FV-05-11VK1, FV-11-15VK1, FV-05-11VKS1 dimensions The grille should be dry after cleaning

WARNING

Disconnect power source before working on unit.

CAUTION

Routine maintenance must be done every year. Please wear gloves during the cleaning work.

Never use gasoline, benzene, thinner or any other such chemicals for cleaning the ventilating fan.

Do not immerse motor in water when cleaning. Do not soak resin parts in water over 140°F (60°C).

1.Remove grille by pulling down one mounting spring (Fig.15), then pull down the other. (For models plug-in FV-MSVK1 or FV-NLVK1: Pull down the mounting spring that without lead wire passed side, and remove motion sensor or LED night light as shown in Fig.16) (Squeeze mounting spring and pull down carefully)

2.Clean grille. (Don’t put into hot water. Use non-abrasive kitchen detergent, wipe dry with clean cloth) (Fig.17)

3.The grille should be dry after cleaning.

4.Remove dust and dirt from fan body using a vacuum cleaner. (Fig.18)

5.Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with clean cloth. (Fig.19)

6.Reinstall grille.

Mounting spring

	Grille
Gloves	Slot
	Fig.15
	Clasp
Ceiling
Motion sensor
(FV-MSVK1 only)	LED night light
	(FV-NLVK1 only)
	Fig.16

Gloves

Fig.17

Ceiling

Vacuum cleaner

Fig.18

Ceiling

Gloves

Fig.19

11