Other speaker setup options
[HT878] (Center speaker only) [HT870] [HT520]
∫ Attaching to a wall
1 Drive a screw (not included) into a wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
[HT870]
≥When mounting the front and surround speaker to a wall, we recommend using a string (not included) to prevent it from falling (‹ page 5). ≥Use of optional speaker cables are recommended for
from the pipes supplied with this system.)
setup options
Front and surround speakers [HT870]
230 mm
Center speaker [HT520]
So that the speaker fits up against the wall squarely, be sure to press the speaker cable down into the groove.
Center speaker [HT878]
270 mm
Center speaker [HT870]
Other speaker
150 mm
86 mm
|
|
|
| In this position, the |
|
|
| Move the speaker so |
|
|
|
| speaker will likely |
|
|
| that the screw is in |
|
|
|
| fall if moved to the |
|
|
| this position. |
|
|
|
| left or right. |
|
|
|
|
|
|
|
|
|
|
|
|
|
∫Fitting speaker stands (not included)
[HT878] [HT870] (Center speaker only)[HT520]
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance between screws as shown in the diagram. ≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position. e.g. [HT520] Front speaker
| 5 mm, pitch 0.8 mm |
| 60 mm |
| Speaker stand |
| (not included) |
Attach the stands to | Plate thickness |
these metal screw | plus 7 to 10 mm |
holes. |
|
RQT7429
7