GN Series Hardware Manual
3.3 Bottom View
25
Timeout Min. baud rate SW1 settings
DIP5 DIP6 DIP7 DIP8
3.7ms ON OFF ON OFF
3.1ms ON OFF ON ON
2.5ms 4800 ON ON OFF OFF
1.9ms ON ON OFF ON
1.2ms 9600 ON ON ON OFF
0.6ms 19200 ON ON ON ON
3.3.2 DC Power Connector
DC power connector
Plug in the DC power plug (see page 33) to the DC power connector to supply power to the
GN unit.
3.3.3 LAN0 and LAN1 Ethernet Interface Connectors
These interface connectors are provided as RJ45 sockets with integrated LEDs.
Ethernet port Data transfer rate
LAN0 10/100/1000 Mbps
LAN1 10/100/1000 Mbps
Ethernet LED States:
Left LED state Link activity state Right LED state Link speed
Off 10 Base-T
Green 100 Base-T
Green Link active
Yellow 1000 Base-T
3.3.4 VGA Interface Connector
An external (analog) monitor can be plugged into this Sub-D 15-pin socket.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net