14. Electronic Light Control (ELC) On/Off Switch |
| on |
| off |
When shooting the objects under the high light condi- tion, the lighting can be controlled by the electronic shutter mode.
This switch is used to disable the ELC function. Normally turn on this switch.
15. AGC On/Off Switch |
| on |
| off |
When shooting the objects under the low light condi- tion, the video level can be controlled by the gain of the video amplifier.
This switch is used to disable the AGC function. Normally, turn on this switch.
In the Auto Light On mode, the setting mode is differ- ent by the combination of ELC On/Off switch (14) and AGC On/Off switch (15) as shown below.
|
| ELC On/Off Switch (14) | |||||
|
|
|
|
|
|
| |
|
| On |
|
|
| Off | |
|
|
|
|
|
|
| |
AGC On/Off | On | ELC On |
|
| ELC Off | ||
AGC On |
|
| AGC On | ||||
Switch (15) |
|
|
| ||||
|
|
|
|
|
|
| |
Off | ELC | On |
| Auto Light Function | |||
|
| ||||||
| AGC | Off |
| is disable | |||
|
|
| |||||
|
|
|
|
|
|
|
|
16. White Balance Offset On/Off Switch |
|
| on | ||||
|
| off | |||||
By turning on this switch, the white offset in the AWC/ATW can be adjusted fine by using the R/B Gain Controls (5).
Usually, turn off this switch.
17. |
| on |
| off |
By turning on this switch, the two kinds of white bal- ance can be memorized.
The function of the White Balance Selection Switch is changed as shown below by turning on this switch.
WHITE
AWC | BAL | By turning on this switch |
|
| ||
|
|
| AWC 1 |
|
| |
ATW |
|
|
| AWC 2 |
|
|
|
|
|
|
| ||
|
|
| ||||
MANU |
|
|
|
|
| on |
|
|
|
|
| ||
|
|
|
|
| ||
18/19. Back Light Control (BLC) Mode Selection Switch |
| |||||
| off | |||||
The back light sensing zone can be set in the Auto Light On mode.
00: BLC OFF (All of the screen)
01:BLC Preset 1 (Pattern 1 Sensing Zone)
10:BLC Preset 2 (Pattern 2 Sensing Zone)
Sensing
Zone
|
|
|
|
|
|
|
|
BLC Preset 1 | BLC Preset 2 | ||
11:Automatic Sensing Zone
The Automatic Sensing Zone setting works effec- tively against the optical shading around the screen in an optical instrument use.
In this case, this camera sets the sensing zone automatically when the AWC has been set with the white objects.
This function is invalided by setting the white balance again.
In the AWC mode, the Automatic Sensing Zone setting is available.
20. Aperture Level Selection Switch |
| on |
| off |
The aperture level can be selected by this switch. High level can be obtained by turning on this switch. Low level can be obtained by turning off this switch.
21. Cable Selection Switch |
| on |
| off | |
| ||
This switch is provided for optional cable GP- | ||
CA162/38 and |
| |
CAUTION: BE SURE TO TURN ON THIS SWITCH BEFORE TURNING ON THE POWER.
When using the optional cable
Camera Head GP-KS162H (Option)
31.Manual Iris Control Ring
This ring is used to adjust the lens iris manually.
32.Focus Ring
This ring is used to adjust the focus of the picture. To adjust the focus, loosen the Focus Lock Ring (33) by rotating it clockwise (viewed from the front of the cam- era) and turn the Focus Ring until picture becomes the best resolution. Secure the Focus Ring by rotating the Focus Lock Ring(33) counterclockwise.
33.Focus Lock Ring
This ring is used to secure the Focus Ring.
