Panasonic GP-KS162CUD manual Optional Accessories

SPECIFICATIONS (with the combination of Optional Camera Head GP-KS162H)

Pick-up Device :	1/2-inch Interline transfer CCD image sensor with 768 (H) x 492 (V) pixels
Horizontal Resolution :	480 lines
Minimum Scene Illumination :	0.3 footcandles (3 lux) (F1.4 with AGC ON more than 30 IRE of Y signal with set up)
	0.5 footcandles (5 lux) (F1.6 with AGC ON more than 30 IRE of Y signal with set up)
Signal to Noise Ratio :	50 dB (Standard condition, Y signal)
Video Output :	1.0 Vp-p/75 ohms, composite video, BNC connector x 2)
Scanning System :	2:1 Interlace
Synchronization :	Internal Sync only
White Balance :	Auto Tracing White Balance(ATW)/Auto White Balance Control(AWC)/Manual(MANU)
Gain Control :	Auto Light On/Off, Video Level(Off/Manual)
Switches :	White Balance Mode (ATW/MANU/AWC), AWC SET(SET), Auto Light ,
	Video Level(Off/Manual)
Controls :	R,B gain, VIDEO Level
Power Source :	12V DC, 300 mA
Camera Cable Length :	GP-CA162/2 Cable	6.6 feet(2-meter), GP-CA162/3 Cable 9.9 feet (3-meter),
	GP-CA162/38 Cable 12.5 feet (3.8-meter), GP-CA162/10 Cable 33 feet(10-meter)
Ambient Temperature :	14°F - 104°F (− 10°C - +50°C)
Dimensions :	Camera Head :	2/3” (Diameter) x 1-1/2”(D), (17(Diameter) x 35.5 (D) mm)
	Camera Control Unit : 4-11/16”(W) x 1-7/16”(H) x 6-1/8”(D)
		(120 (W) x 36 (H) x 157 (D) mm)
Weight :	Camera Head :	0.035 lbs (14 g)
	Camera Control Unit : 1.2 lbs (550 g)

Weight and dimensions indicated are approximate.

Specifications are subject to change without notice.

Optional Accessories

.

•Camera Cable GP-CA162/2, GP-CA162/3, GP-CA162/38 or GP-CA162/10

. • C-mount Adaptor GP-AD22TA

. • Wide Angle Lens GP-LM3TA or GP-LM7TA

. • Pinhole Lens GP-LP12TA

. • Tele Angle Lens GP-LM15TA or GP-LM24TA

•Camera Head GP-KS162H

-7-