- 67 -
Dividing a scene to partially delete (iFrame, MP4)
Divide the iFrame or MP4 scene, and delete unnecess ary parts.
This divides the recorded scenes in two and deletes th e front half or back half.
The scenes that were deleted after division can not be recovered.
≥Set the mode switch to , select the play mode selection icon, and set to [iFrame] or
[MP4]. (l28)
1Select the menu.
2Select the scene you wish to divide using the cursor button and press the
ENTER button.
3Select to set the dividing point.
≥It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. (l57)
≥Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that is
to remain.
4Select the part for deletion, then press the ENTER button.
5Select [YES] and press the ENTER button to confirm (play back) the part for
deletion.
≥A confirmation message appears when [NO] is selected.
Proceed to
Step
7.
6Stop the playback.
≥A confirmation message appears.
7Select [YES] and press the ENTER button.
≥To continue dividing and deleting other scenes, repeat
Step
s 2-7.
To complete dividing
≥Press the MENU button.
≥It may not be possible to divide scenes with a short recording time.
≥The actual division may slightly slip off the previously de signated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE]
0h00m15s0h00m15s0h00m15s