- 85 -
2Select [RECORDER] using the cursor button on the unit and press the
ENTER button.
≥When you select an option other than [RECORDER], re connect the USB cable.
≥/
When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
3
Select the media you wish to dub, then press the ENTER button.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button
to turn the LCD monitor on.
4Dub through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥
Do not press the ENTER button of the unit during d ubbing.
≥Do not use any other USB cables except the supplied one. (O peration is not guaranteed with any
other USB cables.)
≥When this unit is connected to a Panasonic Blu-ray disc reco rder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplie d from the connected equipment to this
unit.
≥For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
≥When you connect the unit to a Blu-ray disc record er, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, per form the
operations of
Step
s 1 to 4.
≥You cannot change the mode of the unit or turn off the unit while it is con nected to a Blu-ray disc
recorder or DVD recorder. Disconnect the USB cable before perf orming either of these
operations.
≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
About the screen indication of the unit
≥When the unit is accessing the SD card, card access icon ( ) appears on the unit screen
or the access lamp is on.
≥
When the unit is accessing the built-in memory, built-in memory access icon ( ) appears
on the unit screen or the access lamp is on.
≥Be careful not to disconnect the USB cable, AC adaptor or batter y while the unit is accessing
media, as this may result in the loss of recorded content.