- 76 -
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in
this unit and a built-in memory.
∫Check the used space of the copy destination
It is possible to check the used space of the SD card or built-i n memory by [MEDIA STATUS]
(l39).
≥Depending on the media condition, some remaining capacity of the SD card or built-in memory
may not be used.
≥If the remaining capacity on a single SD card is not enough , you can copy to multiple SD cards
following the instruction on the screen. In this case, the last scene copied to an SD card is
automatically divided to fit the space on the SD card.
≥If you divide the scenes (l66), and copy by scene selection, it is possible to copy matching the
remaining capacity of the media, or only the necessary par ts.
≥If there is not much remaining capacity in the SD card, a confirma tion message asking to copy
after deleting all data on the SD card is displayed. Be awar e that deleted data cannot be restored.
≥Refer to page 77 for approximate time for copying.
1Change the mode to .
≥Use a sufficiently charged battery or the AC adaptor.
2Select the menu.
≥When there is a scene that was relay recorded, a message is displayed. Select [YES] using the
cursor button and press the ENTER button, and copy after c ombining relay recorded scenes to
the SD card. (l69)
Copy/Dubbing
Copying between SD card and Built-in Memory [HC-V210M]
Copying
: [COPY]
[]When copying from the SD card to the built-in mem ory
[]*When copying from the SD card to the USB HDD
[]When copying from the built-in memory to the SD ca rd
[]*When copying from the built-in memory to the USB HD D
* Displayed only when connecting a USB HDD. (l78)