– 108 –
INSERT/ASSEMBLE AUTO EDIT SET UP menu
Key
F1
F2
F3
F4
F5
F6
F7
Key designation
TIMING°1
For setting the edit timing.
V PREV
Video preview.
A PREV
Audio preview.
PLR SYNC
Player synchronization.
PREROLL
For setting the preroll time.
POSTROLL
For setting the postroll time.
REACTION
For compensating the time
with a time lag
Description
Sets the timing at which to record the fields at the edit IN point
and OUT point. This timing can be set by pressing the F1 key
and the F key together.
F1: Editing starts from the odd-numbered field at the IN
point, and it ends when an even-numbered field one
frame before the OUT point is recorded.
F2: Editing starts from the even-numbered field at the IN
point, and it ends when an odd-numbered field at the
OUT point is recorded.
F1/F2: The fields for the edit IN point and OUT point are
determined by the timing at which the edit command is
issued.
If the edit timing command is issued in an even-
numbered field, editing is ended in an odd-numbered
field; conversely, if the edit timing command is issued in
an odd-numbered field, editing is ended in an even-
numbered field. However, the F1 setting is forcibly
established when manual editing is performed using this
unit alone.
Bear in mind that if mutually different settings have been
selected, the setting selected last takes precedence.
≥The timing can also be set using the F1 (TIMING) key of the
MANUAL SET UP menu.
Selects the video signals for preview duration (between IN and
OUT points).
VVV: Monitors video input signals.
VBV: Monitors black signals.
Selects the audio signals for preview duration (between IN and
OUT points).
SSS: Monitors audio input signals.
SMS: Monitors mute sound.
Sets whether to activate the phase synchronization function in
deck-to-deck editing and set the editing accuracy to n0 (when
TC is selected).
ON: The phase synchronization function is activated, and the
editing accuracy is set to n0 (when TC is selected).
However, when CF does not match during editing in the CF
mode, the player’s IN point is forcibly incremented by i1.
OFF: The phase synchronization function is not activated.
Sets the preroll time in 1-second increments.
Any time from 0 to 30 seconds can be selected.
Sets the postroll time in 1-second increments.
Any time from 0 to 30 seconds can be selected.
Compensates the reaction time after the ENTRY button is
pressed until the actual operation. Compensation from 0 to 30
frames°2in 1-frame increments can be provided.
≥When an edit point has been set by the ENTRY button, the
value obtained after subtracting the reaction time from the
moment when the button was pressed becomes the edit point.
Operation
1. Press the F7 (REACTION) key.
2. Adjust with the ADJUST control.
3. Press the F7 key.
°1This item cannot be displayed when the 1080/23p or 1080/24p format has been selected. (It is forcibly set to F1.)
°2This range differs depending on the format used.