– 77 –
TC/CHR SET UP menu
Key
F1–F6
F7
F8
F9
F10
F11
F12
F13
Key designation
TCG OUT
EXIT
VITC.L
VITC
For superimposing VITC
onto the SD output.
——
VITC
For selecting the VITC.
LTC
For selecting the LTC.
Description
For selecting whether to latch the TCG display and LTC output
using the INPUT CHECK key°.
MOMNT: Establishes the INPUT CHECK mode only while the
key is held down.
LATCH: The INPUT CHECK mode is established when the
INPUT CHECK key is pressed, and it is held even
when the key is released. The mode is released in a
mode other than the EJECT, STBY ON/OFF or STOP
mode or when the F1 (OUTPUT) key on the HOME
menu is pressed.
Returns the VTR to the TC/CHR menu screen.
For transferring to the VITC LINE selection menu.
SD mode: The recording VITC superimposing
and the lines in which it is
superimposed are set. The
playback VITC superimposing and
the lines in which it is
superimposed are set.
HD mode: The DOWN CON SD output VITC superimposing
and the lines in which it is superimposed are set.
For selecting whether the VITC information is to be
superimposed on SD recording and output.
ON: VITC is superimposed.
OFF: VITC is not superimposed.
For selecting whether the VITC information is to be carried on
the HD SDI output.
Selects whether the VITC is to be carried.
ON: VITC is carried.
OFF: VITC is not carried.
For selecting whether the LTC information is to be carried on the
HD SDI output.
Selects whether the LTC is to be carried.
ON: LTC is carried.
OFF: LTC is not carried.
°The video input signals can be checked at the SD SDI MONITOR OUT or HD SDI MONITOR OUT connector, and
the audio input signals can be checked at the MONITOR connector and HEADPHONES jack; these signals are
switched to the input signals while the INPUT CHECK key is held down.
NTSC: 10–20 lines
(Default 14, 15)
PAL: 8–22 lines
(Default 11, 13)