– 72 –
TC/CHR menu
Description
ON: CF BIT is recoorded.
OFF: CF BIT is not recorded.
≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
the VTR conforms to the external color frame bit.
Transfers the VTR to the TC/CHR SET UP menu screen.
Transfers the VTR to the TC/CHR CONVERT menu screen.
LTC: LTC is read out all the time.
AUTO: At low speed, VITC is read preferentially. When it is not
read, then LTC is read.
VITC: VITC is read out all the time.
≥In either setting, when the time code cannot be read, values
corrected by control signal are read out. (Interpolation mode is
assumed and [INTRP] is displayed on the HOME menu.)
TC: Only the TC is superimposed.
TC.ST: The TC and VTR status are superimposed.
TC.UB: The TC and user bits are superimposed.
TC.ST.RT: The TC, VTR status and remaining tape time are
superimposed.
OFF: No superimposed display.
ON: The warning displays are superimposed.
OFF: The warning displays are not superimposed.
REVERSE: Characters appear against a black background.
INTENSE: Characters are displayed more intensely.
Key
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
CF BIT°1
For selecting the color
frame bit ON/OFF during
recording.
——
SETUP
CONVERT°2
TCR
For selecting time code
read out mode.
SUPER
For setting superimpose.
SUPER ERR
CHR TYPE
For selecting type of
character to be
superimosed.
°1This is displayed only when the 480/59.94i system format has been selected.
°2This is displayed only when the 1080/23p, 1080/24p or 1080/50i system format has been selected.