44
VQT3J15
When about 5 minutes have passed without any operation, this unit automatically turns of f t o
save battery life.
≥The Power Save function will not activate when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD burner etc.
jPRE-REC is used
The unit is put into recording pause approx. 1second when the unit is turned on with the
mode set to or .
≥Depending on the recording conditions, start time may be longer than 1second.
≥In the Quick power on mode, the zoom magnification becomes 1k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopene d.
≥When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start will not work if there is no SD card inserted.
≥/
Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥Change the mode to or .
1Set [QUICK START] to [ON].
2 Close the LCD monitor while the mode is
set to or .
The status indicator A flashes green and the unit
goes into Quick start standby mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
jmode is set to
≥Depending on the recording conditions and menu settings, ti m e for Quick start may be
longer than 0.6 seconds.
≥It may take some time for Automatic white ba lance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes 1k.
[ECONOMY] [OFF]/[5 MINUTES]
[QUICK POWER ON] [OFF]/[ON]
[QUICK START] [OFF]/[ON]
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 44 ページ 2011年1月5日 水曜日 午後2時51分