71
VQT3J15
5(When [SELECT] is selected in step 4)

Touch the range of pictures that will be stored.

Previous (Next) page is displayed by touching /
.
* Only select the picture for start point if only 1 pict ure is
to be stored.
A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish point.
Touch [YES] to store the pictures.
If you turn off the unit or change the mode, this function is canceled.
The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
Color balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
Image quality is different from ordinary still picture recording.
The Photo light is turned on to make it easier to focus when you are recording in dark places
where it is hard to focus.
Switch to Manual Mode. (l72)
Set the Photo light to ([AUTO]) or ([OFF]). (l57)
When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
It may not turn on when the LED light is very hot.
You can add a shutter sound when recording still pictures .
No shutter sound is emitted in Motion Picture Recording Mode.
[AF ASSIST LAMP]
: [PICTURE] # [AF ASSIST LAMP] # [AUTO]
[SHTR SOUND]
: [PICTURE] # [SHTR SOUND] # desired setting
[OFF]: Cancel the setting.
:Volume low
:Volum e high
AStart p oint *
BFinish point
MENU
MENU
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 71 ページ 2011年1月5日 水曜日 午後2時51分