Panasonic HDC-HS80P/PC, HDC-TM80P/PC Wind Noise Canceler, Zoom MIC, MIC Level, Touch To adjust

[WIND NOISE CANCELER]

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

≥Switch to Manual Mode. (l 72)

MENU : [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]

≥This function’s default setting is [ON].

≥When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed.

≥You may not see the full effect depending on the recording conditions.

[ZOOM MIC]

Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle).

≥Switch to Manual Mode. (l 72)

MENU : [RECORD SETUP] # [ZOOM MIC] # [ON]

[MIC LEVEL]

When recording, the input level from the built-in microphones can be adjusted.

≥Switch to Manual Mode. (l 72) 1 Select the menu.

MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting

[AUTO]:		AGC is activated, and the recording level is adjusted
		automatically.
[SETr	]/[SET]:	The desired recording level can be set.

2(When [SETr]/[SET] is selected)

Touch	/	to adjust.
≥ Touch	to activate/disactivate AGC.

When AGC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When AGC is disactivated, natural recording can be performed.

≥ Adjust the microphone input level so that the last 2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

ALeft

B Right

C Microphone input level

3Touch [ENTER] to set the microphone input level and then touch [EXIT].

≥ (Microphone input level meter) appears on the screen.

67

VQT3J15