BEFORE CALLING THE SERVBCE TECHNICIAN
PROBLEM
Nothing works
Oven doesn't work
POSSIBLE CAUSE
Range electric cord not connected to service outlet.
Fuse blown or circuit breaker tripped.
No electricity to range,,
Oven temperature control may be set to "OFF"
Clock knobs may be set wrong.
Selector may be set to "OFF" or "TIMED BAKE",
DON'T CALL TECHNICIAN
UNTIL YOU CHECK
Connect service cord to outlet (wall plug).
Check fuse in house fuse box or reset circuit breaker.
Check main power switch
Check oven temperature control setting
Check clock controls
Check selector setting.
Oven light doesn't work Bulb burned out or loose°
Oven door doesn't work Accidentally locked for clean cycle°
Replace bulb or tighten
Read self clean instructions_
ADJUSTING OVEN TEMP KNOB
The temperature in your new oven has been set cor- rectly at the factory, so be sure to follow the recipe
temperatures and times the first few times you bake in your new oven,
If you think the oven should be hotter or cooler, you can adjust it yourself. To decide how much to change
the temperature, set the OVEN TEMP knob 20°F higher
or lower than the temperature in your recipe, then
bake. The results of this "test" should give you an idea
of how much the temperature should be changed°
4,. Hold the knob handle (A on illustration) while turn-
ing the knob skirt (B on illustration) in the desired
direction. As you turn you should be able to hear clicks and feel notches or teeth, Each click or notch
is 10°_, You can turn up to 5 clicks or notches in either direction,
5.When you reach the desired adjustment, retighten both screws and replace the knob.
To adjust oven temperature:
1o Turn OVEN TEMP knob to OFF and pul! knob straight off to remove.
2, Look at the back of the knob, The arrow pointing to
the center of one of the screws indicates the original factory setting. The knob can be adjusted up to 50 ° hotter or 50 o cooler, in 10 ° increments.
3. Use a | screwdriver to loosen the two screws about | MAKES OVEN COOLER | MAKES OVEN HOTTER |
t turn | each, |
|
|
25
