mowto clean your range
SELF.CLEANING OVEN
BEFORE A CLEANING CYCLE
A_ DO NOT PUT MODULES OR COMPONENTS IN THE
OVEN FOR
DISTORT AT THE HIGH TEMPERATURE Remove all items from the oven which are not a part of the range (pots pans etc) Also remove the oven racks and the broiler pan and grid Oven racks will discolor if left in during clean cycle
B.Soil on the oven front frame under the front edge of the cooktop and on the door liner outside the seal
will not be cleaned during a cleaning cycie This soii will become baked on if not removed before the cy.
cle Use detergent and hot water with a
the cleaning cycle Rinse well with a vinegar and water m_xlure When cleaning the door seal wipe carefully wtth damp cloth only the door seat is made of a glass fiber and can be easily damaged
DO NOT let cleaning materials get on or touch the door seal The materials will cause the seal to crack and become brittle
CWipe out the bottom of the oven if there is a large
amoun! ol food or puddles of grease Large
amounts of sod may result in smoke from the oven vent
TO SET A CLEAN CYCLE
STOP TIME
SELECTORTEMPERATURE
CONTROL
I Close the oven door
2.The range clock should be set for the correct time of day
3.Turn Oven Selector to CLEAN Turn Temperature Control knob to CLEAN.
4.Push in and advance STOP knob past the time of day for the number of hours to clean the oven (This
automatically locks the door ) For the first cleaning, advance STOP knob 2_/_ hours past the time of day
if your oven is not satisfactorily clean, then in_ crease the time for future cleanings
,When the oven is set for a CLEAN cycle, the OVEN signal light will come on and stay on until the oven
has reached clean temperature Once the CLEAN temperature has been reached, the OVEN signal light will go on and off to show the temperature is being kept
6_ The LOCK light wil! come on to show that the oven door carl not be opened until the lock light goes out
and the Selector and Temperature Controls are turned to OFF
TO STOP A CLEAN CYCLE
7.CAUTION: After setting the oven for a CLEAN cycle, DO NOT try to open the oven door as this can damage the automatic
OFF wait a few seconds and the door may be open- ed
If the door latch finger becomes positioned so as to keep the oven door from closing all the way this can be corrected as follows:
a Make sure oven is cool!
b Open oven door turn Oven Selector to CLEAN. push in oven interlock button (button is at right top of the oven door opening) and hold button in for about 15 seconds
c Next turn Oven Selector to OFF and again push in the oven interlock button for about 15 seconds
The latch finger being motor driven, will turn so the oven door may be closed
8._ If you want to use the oven any time before a
CLEAN cycle is done, turn Selector and Temperature Controls to OFF. WAIT UNTIL LOCK LIGHT GOES OUT BEFORE OPENING DOOR
WHEN CLEAN CYCLE IS COMPLETED
9 Turn Oven Selector and Temperature C_ontrols to
OFF
10.As soon as the oven has cooled the oven door wiil unlOck and the LOCK tight will go out The oven door can then be opened
11.Do not use cornmercia! oven cleaners or oven pr@ lectors in or near the oven. These products plus the high temperature of the CLEAN cycle may damage the porcelain finish
12_ After a CLEAN cycle you may see some white ash in lheoven Simply wipe out with damp cloth The
amount of ash will depend on the amount and type of soil
13.If white spots remain they should be removed with
cleaning cycle
24
