Panasonic HDC-TM80P/PC, HDC-HS80P/PC, HDC-SD80P/PC owner manual 129

	Recording
Problem	Check points
The unit arbitrarily stops ≥ Use an SD card that can be used for motion picture
recording.	recording. (l24)
	≥ The recordable time may have shortened due to the
	deterioration of the data writing speed or repeated
	recording and deletion. Using the unit, format the SD
	card, built-in memory or HDD. (l46, 47)
	≥ If [AGS] is [ON], record in the normal horizontal position
	or set [AGS] to [OFF]. (l65)

	≥
	If the unit is exposed to strong vibrations or shocks while
	recording on HDD, recording may stop to protect the
	HDD. If the unit is used in a place with loud sounds, the
	recording may stop due to sound vibrations. Recording
	data on an SD card is recommended in these places.
Auto focus function	≥ Switch to Intelligent Auto Mode.
does not work.	≥ If you are trying to record a scene which is hard to bring
	into focus in Auto Focus Mode, use the Manual Focus
	Mode to adjust the focus. (l37, 75)
Color balance of images ≥ In a place with multiple light sources, such as a
is strange when	gymnasium or a hall, set the white balance setting to
recording in a place	(Indoor mode 2). If you cannot record clearly with the
such as a gymnasium.	(Indoor mode 2), set it to	(Manual adjustment mode).
	(l73)
Color or brightness of	≥ Color or brightness of the image may change, or you may
the image changes, or	see horizontal bars in the image when the object is
you may see horizontal	recorded under fluorescent light, mercury light or sodium
bars in the image.	light, etc., but this is not a malfunction.

≥In Motion Picture Recording Mode, record in Intelligent

The LCD monitor flickers Auto Mode or set the shutter speed to 1/60 in areas

indoors.	where the power supply frequency is 60 Hz, or 1/100 in
	areas of 50 Hz.
	≥ In Still Picture Recording Mode, this will not affect the
	recorded image.
Object seems to be	≥ Object seems to be warped slightly when the object
warped.	moves across the image very fast, but this is because the
	unit is using MOS for the image sensor. This is not a
	malfunction.

129

VQT3J15