Panasonic HDC-Z10000P 1, 2

23

VQT3U98

Inserting/removing an SD card

Caution:

Check that the access lamp has gone off.

1Open the SD card slot cover

and insert (remove) the SD

card into (from) the card slot

B.

≥One SD card can be inserted into each of

the card slot 1 and the card slot 2.

≥Face the label side C in the direction

shown in the illustration and press it

straight in as far as it will go.

≥Press the center of the SD card and then

pull it straight out.

2Securely close the SD card slot

cover.

≥Securely close it until it clicks.

≥Do not touch the terminals on the back of

the SD card.

≥Do not apply strong shocks, bend, or drop

the SD card.

≥Electrical noise, static electricity or the

failure of this unit or the SD card may

damage or erase the data stored on the

SD card.

≥When the card access lamp is lit, do not:

jRemove the SD card

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

Performing the above while the lamp is on

may result in damage to data/SD card or

this unit.

≥Do not expose the terminals of the SD

card to water, dirt or dust.

≥Do not place SD cards in the following

areas:

jIn direct sunlight

jIn very dusty or humid areas

jNear a heater

jLocations susceptible to significant

difference in temperature (condensation

can occur.)

jWhere static electricity or

electromagnetic waves occur

≥To protect SD cards, return them to their

cases when you are not using them.

≥About disposing of or giving away the SD

card. (l144)

When using an SD card not from Panasonic, or one previously used on other equipment,

for the first time on this unit, format the S D card. (l34) When the SD card is formatted, all

of the recorded data is deleted. Once the data is deleted, it cannot be restored.







Access lamp A

≥When this unit is accessing the SD

card, the access lamp lights up.

HDC-Z10000P-VQT3U98_mst.book 23 ページ２０１１年１０月４日　火曜日　午後３時２分

Contents

Main Dear customer, Safety Precautions WARNING: CAUTION! CAUTION Page Concerning the battery AC adaptor Battery charger Batteries Product Identification Marking Warni ng CAUTION U.S.A. CONSUMERS: ATTENTION: IMPORTANT SAFETY INSTRUCTIONS Precautions WARNING CAUTION Features About the recording format for recording motion pictures Indemnity about recorded content Cards that you can use with this unit For the purposes of this owner's manual Contents Preparation Recording Playback Editing Menu Display Others Accessories Parts identification and handling Page Page Adjust the length of the grip belt so that it fits your hand. Attaching the eye cup Attaching the microphone holder Page About batteries that you can use with this unit Power supply Charging the battery 1 2 Charging lamp [CHARGE] A Power lamp B Inserting/removing the battery Charging and recording time Charging/Recording time Battery capacity indication Connecting to the AC outlet 1 2 Cards that you can use with this unit Preparation of SD cards Inserting/removing an SD card 1 and insert (remove) the SD card into (from) the card slot B. 2 cover. Access lamp A Turning the unit on/off Selecting a mode Using the LCD monitor 1 2 Using the LCD monitor/Viewfinder How to use the touch screen Touch 3 Touch [ENTER]. Slide while touching About the operation icons LCD monitor adjustment 3 Touch / to adjust settings. 4 Touch [ENTER]. [POWER LCD] [LCD SET] Viewfinder adjustment 1 Adjust the viewfinder according to the position that is easy to view. 2 Adjust the focus by operating the eyepiece corrector lever. Recording yourself Adjusting the field of view Setting date and time Time zone Using the menu screen Using with the wireless remote control Replace a button-type battery Wireless remote control usable range Operation of direction buttons/OK button 1 2 direction button. 3 pressing the OK button. Before recording Formatting cards 2 Selecting a media to record 2 3 C to start recording. Recording motion pictures Screen indications in the Recording Mode About the compatibility of the recorded motion pictures Convergence point adjustment 1 About the convergence point Adjusting the convergence point 2 convergence point. About Convergence Reset To adjust the convergence point with MIX display 3D guide display 2 To switch the screen size assumed for playback 2.9 3D GUIDE button To record in such a way that 3D image of the subject can be effectively reproduced 3 1 Focus adjustment 1 Iris adjustment 2 About the screen indications while recording still pictures Recording still pictures Intelligent Auto Mode/Manual Mode iA/MANU switch Intelligent Auto Mode Automatic White Balance Auto Focus Ring zoom Zoom in/out function Zoom by rotating the ring. Zoom lever/Sub zoom lever About the zoom speed Changing Image Stabilizer Mode Image Stabilizer Function Optical image stabilizer button 1 2 Focus Switch the modes of White Balance by pressing the W.B. button. White Balance To set the White Balance in accordance to the recording scene To finely adjust the White Balance 1 Select the menu. 2 Touch / to adjust settings of color. 3 Touch [EXIT] to complete the setting. 1 2 Iris adjustment Adjusting brightness during the Auto Iris Mode 1 . (l78) 2 Manual shutter speed Microphone setup Audio Input Audio recording Switching Audio Input Using the built-in microphone 1 2 3 4 5 To remove the external microphone, etc., from the audio input terminals 1, 2 (XLR 3 pin) Adjusting the audio input level 2 3 Adjusting the input level of the built-in microphone (2 ch), external microphone or audio device Counter display COUNTER button Setting the Time Code [TC MODE] [TCG] 2 Setting the User Information 2 Setting the Recording Counter To reset the Recording Counter for the Recording Mode [REC COUNTER] Setting the USER button 2 USER button Using the USER button Switch display/not-display of the USER buttons Check the setting of the USER buttons Functions of the USER button List of USER button function Backlight Compensation Push AF Spotlight Black Fade White Fade ATW ATW Lock Focus Assist Digital Zoom Playback parallax adjustment To change to 3D display when in the Playback Mode 1 Play back the scene or still picture recorded in 3D. 2 Press USER button or touch USE R button icon. Histogram 3D Display 3D Macro Convergence Reset Recording Check 1 Press USER button or touch USER button icon in the recording screen. 2 Touch [YES]. To change the 3D image output selection when in the Playback Mode Last Scene Delete 3D video output selection Quick Start 2 Press the QUICK START button. Useful functions Zebra Color Bar Screen ZEBRA button BARS button Switching the screen indications/mode information display 1 screen or playback screen. 2 Headphone Volume Adjustment Using of Operation Icons 2 3 PICTURE] you wish to play back. 5 4 Motion picture/Still picture playback Change the thumbnail display Speaker/Headphone volume adjustment Motion picture compatibility Still picture compatibility Motion picture playback using operation icon Page Creating still picture from motion picture Press the button at the location to be saved as a still picture during the playback. Repeat Playback Resuming the previous playback Useful functions Playback scenes by the selected format 1 2 3 4 Playing back still pictures by date 1 2 3 2 Touch the scene/still picture to be deleted. (When [SINGLE] is selected in Step 1) Deleting scenes/still pictures Protecting scenes/still pictures 2 1 Watching Video/Pictures on your TV 2 3 To display the on-screen information on the TV Connecting with a HDMI cable Listening in 5.1 channel sound Changing the component output setting Connecting with the AV multi cable 2 Viewing with 3D compatible TV To switch the destination of the 3D full high definition video Playing back scenes recorded in 3D as (conventional) 2D video What you can do with a PC HD Writer XE 1.0 Smart Wizard With a PC Important Notice http://panasonic.net/avc/sdcard/information/SDXC.html End User License Agreement Page Operating environment Operating environment for HD WriterXE 1.0 To use the HDWriter XE 1.0 Operating environment for the card reader function (mass storage) Page Page Connecting to a PC 1 2 3 4 http://panasonic.net/avc/sdcard/information/SDXC.html About the PC display Copying your still pictures to your PC DCIM CAM_SD Page If using Mac 1 2 3 4 Dubbing with a Blu-ray disc recorder, video device, etc. Dubbing To dub using equipment with an SD card slot To dub using equipment with a USB terminal Dubbing in high-definition picture quality 1 2 3 4 1 2 Dubbing in standard picture quality Camera Setup 1 Touch [CUSTOMIZE SCENE]. 2 Touch the scene file. 3(To change the setting of the scene file) Change the setting of the camera setting menu. Using the Menu [CUSTOMIZE SCENE] Page Page 1 Touch [GAMMA]. 3 Touch [EXIT] to exit the menu screen. 1 Touch [KNEE]. 3 Touch [EXIT] to exit the menu screen. [GAMMA] [KNEE] [MATRIX] [SKIN TONE DTL] Recording Setup [3D/2D REC MODE] [REC FORMAT] Relay recording Backup recording [RELAY/BACKUP] [TIME LAPSE REC] [TC MODE] Page [HYBRID O.I.S.] [AUTO SLOW SHTR] [Digital Cinema Color] Page Page Switch and display setting Page Page Prioritized face framing [LENS STATUS] [CARD&BATTERY] [OTHER DISPLAY] [FACE FRAMING] Page Other Functions [FORMAT CARD] [CARD STATUS] [REMOTE CONTROL] [REC LAMP] Page Page Page Video Setup Picture Setup Recording indications Indications 2.9 i 60 R 1h20m R 1h20m Playback indications Indication of connection to other devices Confirmatory indications Messages It is not a malfunction in following cases Troubleshooting Power Indication Recording Playback With other products With a PC Others If scenes do not change smoothly when played back on another device About recovery Cautions for use About this unit About the battery About the AC adaptor/battery charger About 3D recording About 3D About 3D viewing About the SD card LCD monitor/viewfinder Causes of condensation About condensation About copyright Carefully observe copyright laws Licenses Recording modes/approximate recordable time Approximate number of recordable pictures Specifications Page Page Page Optional accessories Accessory Order Form HDC-Z10000P-VQT3U98_mst.book 154 Others Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) () Panasonic Camcorder Products Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) Page Others Useful Information (Only For Latin American Countries) Customer Service Customer Service Directory http://www.lar.panasonic.com Mexico Service email: atencion.clientes@mx.panasonic.com Index Numerics A B C K L M O P