116
VQT3U98
≥Recordable time using the battery (l20)
≥This function’s default setting is [1080/60i] (3D recording mode)/[HA] (2D recording mode).
≥Please refer to page 147 about approximate recordable time.
≥When the unit is moved a lot or moved quickly, or when a fast -moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
You can set the relay recording and backup recording.
≥Insert SD cards to card slot 1 and card slot 2.
∫Relay recordingIt is possible to continuously record on the SD card in the other card slot even when the
available capacity of the SD card runs out during the recording.
≥ is displayed on the media to record the video. will disappear when the recording
media is switched and the relay recording is started.
≥Relay recording can only be performed once.
∫Backup recordingSame motion picture can be recorded on two SD cards.
≥ is displayed on the cards the motion pictures is recorded.
≥When [SD CARD 1] is selected as the destination of recording the motion pictures, backup
will be recorded on [SD CARD 2].
≥It is recommended to record on the SD cards that are same speed class and same
capacity when performing the backup recording.
(Relay recording)
≥Destination to record still pictures will be switched to other SD card after performing the
relay recording.
(Backup recording)
≥Backup recording will not be performed for still pictures.
[RELAY/BACKUP][OFF]: Cancel the setting.
[RELAY]: Set the relay recording
[BACKUP]: Set the backup recording
HDC-Z10000P-VQT3U98_mst.book 116 ページ 2011年10月4日 火曜日 午後3時2分