115
VQT3U98
Recording Setup
Switch the Recording Mode to 3D or 2D. (l36)
Switch the picture quality of the motion pictures to record. The selectable recording format
differ depending on the setting of [3D/2DREC MODE]. (l36)
The frame rate and the recording method will vary depending on the recording format.
*1 Motion picture recorded in [1080/30p] is converted to 1080/60i.
*2 It will output with 1080/60i when this unit is connected to a TV with a HDMI cable
(optional). (Video will be recorded with 1080/24p)
*3 The quality of recording is higher in order of [PH], [HA], and then [HE].
is displayed when the recording format for the 3D Recording Mode is selected, and
is displayed when the recording format for the 2D Recording Mode (progressive) is
selected.
For dubbing of the scenes recorded in 3D, or scenes recorded in the recording formats
[PH], [1080/60p], [1080/30p], or [1080/24p], refer to page 107.
Smoother motion picture can be recorded with the higher value for the frame rate. [i] and
[p] of the frame rate means interlace and progressive respectively.
Interlace (interlacing scanning)
Video signal that divides the effective scanning lines to half and send them alternatively
Progressive (progressive scanning)
High density video signal sending the effective scanning lines simultaneously (It will be
higher quality image than the interlace)
It can record with highest quality image in this unit when set to [1080/60p].
: [RECORD SETUP] # desired setting

[3D/2D REC MODE]

[3D]/[2D]

[REC FORMAT]

3D/2D Recording Mode Recording
format Frame rate Recording method
3D Recording Mode [1080/60i] 60i
AVCHD 3D[1080/30p]*1 30p
[1080/24p]*2 24p
2D Recording Mode
(interlace)
[PH]/[HA]/[HE]*3
60i AVCHD
2D Recording Mode
(progressive)
[1080/60p] 60p AVCHD Progressive
[1080/30p]*1 30p AVCHD
[1080/24p]*2 24p
MENU
HDC-Z10000P-VQT3U98_mst.book 115 ページ 2011年10月4日 火曜日 午後3時2分