Panasonic NV-MV15 Series, Hi-Fi) Timer recording, Automatic SP/LP selection, VPS/PDC function

Timer recording

SV120 HV60 HV50 MV15

Automatic SP/LP selection

A:If, at the beginning of a timer programme, there is not enough tape remain to complete it, the SP/LP function will automatically run the tape at LP speed. This ensures that the entire programme will be recorded. If the LP mode is not enough to 'stretch' the remaining tape to fit you will not be able to record all of the TV programmes.

￿It is not possible to automatically activate the EP mode.

	SV120 HV60 HV50 MV15
	VPS/PDC function
VPS/PDC	This setting defines how a special signal controls the beginning and end of
	a recording session. If a TV programme begins or ends earlier or later than
	planned, this function synchronises the beginning and end of the recording
	session with the actual beginning and end of the TV programme.
	ON : The station transmits VPS/PDC signals. You must set the timer to the
	time specified in the TV magazines. Use the special VPS time the TV
	magazine may indicate.
	- - - :The station does not transmit VPS/PDC signals. Try to set the start and
	stop time such that the entire film can be recorded even if a programme
	begins or ends earlier or later than planned.

11