Power supply

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.

This unit has a built-in rechargeable lithium-ion battery. Do not remove except when disposing of this unit. (l 28)

The battery will not be charged if this unit is turned on. Connect it with the PC to charge the battery after turning it off.

It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF and 86 oF).

B

C

A

A: LOCK switch

B: USB cable (supplied)

C: Unlocked when the red indicator is visible

1 Slide A to the left to unlock the side cover and slide the side cover downward to open it.

2 Connect the USB terminal of this unit to a PC with the USB cable B (supplied).

Insert the USB cable securely all the way.

The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second off), indicating that charging has begun.

It will turn off when the charging is completed.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

Do not heat or expose to flame.

Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

If operating time is short even after fully charging the battery, the battery is worn out and needs to be replaced. Please contact your dealer.

When the PC is in a power saving mode such as a standby state, the battery may not be charged. Cancel the power saving mode, and connect this unit again.

Operation is not guaranteed when devices are connected through USB hubs or by using extension cables.

Operation cannot be guaranteed on all devices having a USB terminal.

16

VQT4X87

Page 16
Image 16
Panasonic HXA100D, HX-A100K, HXA100K owner manual Power supply, Charging the battery