When using a microSD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the microSD card. When the microSD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
≥When the microSD card is removed, a notification sound rings, and the access lamp flashes fast. (a state in which a microSD card is not inserted)
≥Do not touch the terminals on the back of the microSD card.
≥Do not apply strong shocks, bend, or drop the microSD card.
≥Electrical noise, static electricity or the failure of this unit or the microSD card may damage or erase the data stored on the microSD card.
≥Do not expose the terminals of the microSD card to water, dirt or dust.
≥Do not place microSD cards in the following areas: j In direct sunlight
j In very dusty or humid areas j Near a heater
j Locations susceptible to significant difference in temperature (condensation can occur.) j Where static electricity or electromagnetic waves occur
≥About disposing of or giving away the microSD card. (Refer to the Owner’s Manual (PDF format).)
∫About the access lamp
≥When the access lamp is lit, do not: j Remove the microSD card
j Turn this unit off
j Insert and remove the USB cable
j Expose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this unit.
Turn this unit on/off
Press the power button to turn on this unit.
The power lamp is turned on.
To turn off this unit
Hold down the power button until the power lamp goes off.
Proceed to “Connecting directly with a smartphone” (l 21) and “Setting up with Setup Wizard” (l 23) to finish the setup of this unit.
You can enjoy the functions of this unit after finishing the setup.
19
VQT4X87
