Setting the dialing mode
If this feature is set to AUTO, the unit will automatically set the dialing mode to TONE or PULSE when the unit is turned on.
If you cannot dial, change the dialing mode setting to TONE or PULSE by following the instructions below:
1
2
3
4
5
6
Press (MENU).
Display: SYSTEM SET UP
Press K, then A C.
DIALING MODE
Press (START/COPY/SET).
MODE=AUTO [Ÿÿ]
Press 
or 
to select the desired setting.
Press (START/COPY/SET).
Press (MENU).
Dial keypad (MENU)
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
Note:
¡If you change the dialing mode setting to TONE or PULSE, set the dialing mode again when you change the line service.
58