Features Summary
Advanced features (cont.)!
How to set menu options
1.Press MENU .
2. Rotate | JOG DIAL | until the following is displayed. | ||
|
|
|
|
|
| Display: |
| ADVANCED1MODE |
|
|
|
|
| |
Press | SET and rotate JOG DIAL until the desired | |||
feature is displayed. |
|
| ||
3.Press SET .
4. Rotate JOG DIAL until the desired setting is displayed.
5.Press SET .
6.Press MENU .
Note:
●Step 4 may be slightly different depending on the feature.
●See page 82 for more details.
Programming table (cont.)
Code |
| Display & Feature | Settings | How the unit operates | |
|
|
|
|
|
|
|
|
|
|
| If you hear slow beeps, erase the |
|
| REC.1TIME1ALERT |
| ON | |
|
|
| recorded messages (p. 73). The | ||
|
|
|
| ||
#43 |
| To alert you with beeps when there |
| ||
|
| beeps will stop. | |||
| |||||
|
| is less than 60 seconds of | OFF |
| |
|
| remaining recording time. |
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| If you hear slow beeps, clear the |
|
| RECEIVE1ALERT |
| ON | |
|
|
| printing problem or supply paper to | ||
#44 |
| To alert you with beeps when a |
| ||
|
| print the stored document. The | |||
| |||||
|
| received document is stored into | OFF | beeps will stop. | |
|
| memory due to a problem. |
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| “ON”: You do not have to press |
|
| FRIENDLY1RCV |
| ON | |
|
|
| FAX START for fax reception. | ||
|
|
|
| ||
#46 |
| To receive a fax automatically | |||
|
|
| |||
|
| ||||
|
| when you answer a call and hear | OFF |
| |
|
| a fax calling tone (slow beep). |
| ||
|
|
|
|
|
|
|
|
|
|
| Voice guidance example: |
|
| FAX1GUIDANCE |
| ON | |
|
|
| “Start transmission.” | ||
|
| If you wish to hear the voice |
| “Transmission is complete.” | |
|
|
| |||
|
| guidance (see right) at each fax | OFF | “Transmission has failed.” | |
#47 |
| transmission/reception, set this | “Transmission has been interrupted.” | ||
|
| feature to “ON”. |
| “Start reception.” | |
|
| ● To hear the voice guidance only |
| “Reception is complete.” | |
|
| when fax transmission/reception | ERROR | “Reception has failed.” | |
|
| fails, select “ERROR”. |
| “Reception has been interrupted.” | |
|
|
|
|
|
|
(The default setting is in bold type.)
86