Error Messages

 

 

 

 

 

 

 

 

 

 

Display message

 

 

Cause & Remedy

 

 

 

 

 

 

 

 

 

 

 

 

There is no room left in memory to record a voice message.

 

MESSAGE1FULL

 

 

 

 

 

 

 

Erase unnecessary messages (p. 73).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is something wrong with the modem circuit. Contact our

 

MODEM1ERROR

 

 

 

 

 

 

 

service personnel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The other party’s fax machine is busy or has run out of recording

 

NO1FAX1REPLY

 

 

 

 

 

 

 

paper. Try again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A recording paper jam occurred. Clear the jammed paper (p. 98).

 

PAPER1JAMMED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The unit is checking that there is no slack on the ink film. Wait for

 

11PLEASE1WAIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a while.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The other party’s fax machine is busy or has run out of recording

 

REDIAL1TIME1OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

paper. Try again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The document is jammed. Remove the jammed document (p. 99).

 

REMOVE1DOCUMENT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attempted to transmit a document longer than 600 mm (2358" ).

 

 

 

 

 

 

 

 

 

 

 

Press

STOP to remove the document. Divide the document

 

 

 

 

 

 

into two or more sheets and try again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A transmission error occurred. Try again.

 

TRANSMIT1ERROR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The unit is too hot. Let the unit cool down.

 

UNIT1OVERHEATED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Handset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display message

 

 

Cause & Remedy

 

 

 

 

 

 

 

 

 

 

 

 

The handset is too far from the main unit. Move closer and try

 

 

No1link1to1base

 

 

 

 

 

 

again.

 

 

 

 

 

Place1on1cradle

 

 

 

 

 

 

 

and1try1again.

 

Play the handset on the main unit and try again.

 

 

 

 

 

The power cord is disconnected. Plug in the power cord.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While programming, the handset lost communication with the

 

 

 

 

 

 

 

12Save1error

 

 

main unit. Move closer to the main unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

was pressed while the handset was on the main unit.

 

 

Please1lift1up

 

 

 

and1try1again

 

 

Lift the handset and press

or

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

, PLAYBACK or

INTERCOM was pressed while

 

 

 

 

 

 

 

Not1available

 

 

the main unit was not in th stand-by mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For fax advantage assistance, call 1-800-435-7329.

91