STARTING THE PANASONIC CAMERA SOFTWARE
1.Insert the CD from the camera into your PC: once it starts up, click Camera Setup. Or, if you have copied the files from the CD to your computer, locate and start EasyConfig.exe.
2.Wait a moment to allow the software to find the camera: the following screen appears.
3. Select the desired camera, then click Execute to bring up the camera dialog shown below:
4.Click Automatic Setup: after a short delay you will see a new browser window with the password settings as shown below:
5.Type in your desired user name and password: these values are not needed by the OneHome system, but must be recorded and saved to make settings to the camera. By default we set the user name to Administrator and the password to password.
2 of 9
