Introduction
Accessory information
Supplied accessories
No.
A
B
C
D
E
A
Accessory item/Part number
AC adaptor/PNLV2360Z
Camera mounting stand/PNZB1002Z
Wall mounting screws (25 mm (1 inch))/XTB4+25AVW
Suspension wire tool
–Safety wire: 1 PQME10080Z
–Washers: 2
Small washer for attaching safety wire to camera ø12 mm (15/32 inches)/XWG26D12VW
Large washer for attaching safety wire to wall ø16 mm (5/8 inches)/XWG4F16VW
–Screws: 2
Small screw for attaching safety wire to camera 10 mm (3/8 inches)/XTB26+10GVW
Large screw for attaching safety wire to wall 25 mm (1 inch)/XTB4+25AVW
Sensor range cap/PNHG1210Z
BCD 
E
Quantity
1
1
4
1
1
Other information
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual product.
Trademarks
RmicroSDHC is a trademark of
RiPhone and iPad are registered trademarks of Apple Inc.
RAndroid is a trademark of Google Inc.
RAll other trademarks identified herein are the property of their respective owners.
Notice
RThe hub supports microSD and microSDHC memory cards. In this document, the term “microSD card” is used as a generic term for any of the supported cards.
For assistance, please visit www.panasonic.com/support | 3 |
