Original document Page layout
8 in 1
5.2.4 Poster feature (Scanner glass only)
You can make copies divided into 2 (1 X 2), 4 (2 X
2) or 9 (3 X 3) sections to make enlarged copies of
the individual sections. You can then glue them together
to make a poster.
1Set the original (page 19).
2Press MPage LayoutN repeatedly to select PAGE
LAYOUT.
3Press MCN or MDN repeatedly to select POSTER.
A MSetN
4Press MCN or MDN repeatedly to select 1 X 2, 2 X
2 or 3 X 3. A MSetN
5If necessary, enter the number of copies (up to 99).
A MStartN
6After you finish copying, press MStopN to reset this
feature.
Note:
RYou can save the previous page layout setting
(feature #467 on page 67).
5.2.5 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1Set the original (page 19).
RTo make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2Press MPage LayoutN repeatedly to select PAGE
LAYOUT.
3Press MCN or MDN repeatedly to select N in 1.
A MSetN
4Press MCN or MDN repeatedly to select the number of
original documents from 2 in 1, 4 in 1 or 8
in 1. A MSetN
5Press MCN or MDN repeatedly to select the layout from
PORTRAIT or LANDSCAPE. A MSetN
6If necessary, enter the number of copies (up to 99).
7When using the scanner glass:
1. MStartN
RThe unit will scan 1 page.
2. Place the next document on the scanner glass
and press MSetN. Repeat this until all the
documents are scanned.
RThe unit will start copying.
RYou can press MStartN anytime to start
copying.
When using the automatic document feeder
(KX-MB2010/KX-MB2025/KX-MB2030 only):
MStartN
8After you finish copying, press MStopN to reset this
feature.
Original document Page layout
2 in 1” “PORTRAIT
LANDSCAPE
4 in 1” “PORTRAIT
LANDSCAPE
39
5. Copier