Feature/Code Selection
Setting the recording paper
type for paper input tray
MBNM3NM8NM3N
M1N “PLAIN PAPER” (default):
75 g/m2 to 90 g/m2 paper.
M2N “THIN PAPER”:
64 g/m2 to 75 g/m2 paper.
Note:
RThis setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 29.
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N
M1N “PLAIN PAPER” (default):
75 g/m2 to 90 g/m2 paper.
M2N “THIN PAPER”:
64 g/m2 to 75 g/m2 paper.
Note:
RThis setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 29.
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
To set the length of time before the unit enters power save mode.
M1N “5min” (default): 5 minutes
M2N “15min”: 15 minutes
M3N “30min”: 30 minutes
M4N “1h”: 1 hour
Note:
RWhen in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
MBNM4NM6NM2N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Note:
RThe previous setting will be held individually for copying.
RThe previous setting will be held individually for sending faxes (KX-MB2025/
KX-MB2030 only).
Setting the default operation
mode
MBNM4NM6NM3N
(KX-MB2025/KX-MB2030
only)
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
M1N “COPY” (default): Copy mode is selected as default.
M2N “FAX”: Fax mode is selected as default.
Note:
RYou cannot select the scan mode using this feature.
Setting the default operation
mode timer
MBNM4NM6NM4N
(KX-MB2025/KX-MB2030
only)
To set the timer before returning to the default operation mode (feature #463).
M0N “OFF”: Deactivates this feature.
M1N “30s”: 30 seconds
M2N “1min” (default): 1 minute
M3N “2min”: 2 minutes
M4N “5min”: 5 minutes
Setting toner save feature
MBNM4NM8NM2N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The toner cartridge will last longer.
Note:
RThis feature may lower the print quality by reducing toner consumption.
RThis setting is valid for copying, and when the unit automatically prints
reports/lists.
RThis setting is invalid for printing received faxes (KX-MB2025/KX-MB2030
only).
61
8. Programmable Features