8.2 Basic features
Feature/Code Selection
Setting the date and time
MBNM1NM0NM1N
Enter the date and time using the dial keypad. See page 22 for details.
Setting your logo
MBNM1NM0NM2N
(KX-MB2025/KX-MB2030
only)
Enter your logo using the dial keypad. See page 23 for details.
Setting your fax number
MBNM1NM0NM3N
(KX-MB2025/KX-MB2030
only)
Enter your fax number using the dial keypad. See page 23 for details.
Selecting the language
MBNM1NM1NM0N
(KX-MB2000HX/
KX-MB2010HX/
KX-MB2025EX/KX-MB2030EX
only)
The display and reports will be in the selected language.
RThe location setting must also match your location. See feature #114 on
page 58.
M1N “ENGLISH”: English is used.
M2N “CZECH”: Czech is used.
M3N “SLOVAK”: Slovak is used.
M4N “HUNGARIAN”: Hungarian is used.
1. MMenuN A MBNM1NM1NM0N
2. Press M1N to M4N to select the desired language. A MSetN A MMenuN
Note:
RThe default may vary depending on the model.
Selecting the location where
you use
MBNM1NM1NM4N
(KX-MB2025EX/
KX-MB2030EX only)
This setting must match your location.
RThe language setting is also available (feature #110 on page 58).
M1N “CZECH” (default): To use in Czech.
M2N “SLOVAKIA”: To use in Slovakia.
M3N “HUNGARY”: To use in Hungary.
Setting the dialling mode
MBNM1NM2NM0N
(KX-MB2025/KX-MB2030
only)
M1N “PULSE”
M2N “TONE” (default)
See page 18 for details.
Setting recall/flash time
MBNM1NM2NM1N
(KX-MB2025/KX-MB2030
only)
The recall/flash time depends on your telephone exchange or host PBX.
M0N “900ms”
M1N “700ms”
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms” (default)
MGN “90ms”
MBN “80ms”
Note:
RIf the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
MBNM1NM4NM5N
M1N “NORMAL” (default)
M2N “DARKER”
58
8. Programmable Features