113
Setup from the Front Panel and WebSetup
3
Click WebSetup.
If a password has been set on the printer, you are prompted to
enter it before you can access Fiery WebSetup.
The options that you can specify from Fiery WebSetup are grouped into
three categories: System Setup, Network Setup, and Printer Setup. These
are described in the following sections.
If you change a Setup option, the Cancel and Save buttons flash when you
click to select another Setup category.
•Click Save to save a change made to a setting.
•Click Cancel to cancel a change.
NOTE:
•You must click either Save or Cancel before you can proceed to another
Setup category or exit Fiery WebSetup.
When you have finished specifying settings from Fiery WebSetup, click
Save to save your settings, and then close the Fiery WebSetup window.