178
Care and Maintenance
Disk Is Full Erase or replace the printer’s hard disk.
Execute the Reset Queues menu from the
printer’s front panel. See “Reset Queues” on
page 111.
Disk
Device Failure
Cycle Power. If printer does not function
normally, call for service.
Error %s
Cycle Power Unrecoverable error happened. Turn off the
printer.
Engine Interface Error
Cycle Power
Cycle Power. If printer does not function
normally, call for service.
Flash
Device Failure
Flash DIMM hardware error. Cycle Power. If
printer does not function normally, call for
service.
Flash File
Operation Failed
Hard disk is functioning abnormally. Cycle
Power. If printer does not function normally,
call for service.
Front or Right door
Open
Close Front or Right door.
Fuser Unit
wearing out
Fuser unit will need to be replaced soon.
Fuser Unit
Not installed
Install a Panasonic fuser unit.
Fuser Unit
Worn out
Replace the fuser unit.
Imaging Unit
wearing out
Imaging unit will need to be replaced soon.
Imaging Unit
No tension
Set the upper lever of the imaging unit to
“Lock”.
Imaging Unit
Not installed
Install imaging unit.
Imaging Unit
Worn out
Replace the imaging unit.
Initializing Printer is initializing.
Insert printed pages in
MP tray, press Continue
Insert printed pages into multi-purpose (MP)
tray, then press the Continue/Forward
button.
Message Corrective action/additional information