35
Printer Setup
NOTES:
•
To optimize your printer’s performance, always use clean,
unused media.
•
Be careful not to leave fingerprints on the media, which can result
in a smudged print.
•
Reusing media that has been fed through the printer once (for
example, after jams) can reduce the life of the consumables and
paper path components.
•
The recommended transparency is 3M CG3700.
If the print
quality is poor, try printing on the other side.
5
Place the media in the tray under the hooks.
The height of media should not exceed the limit mark on the tray, or
it may cause a jam.
NOTES:
•
Load media with the print side down. Most media has instructions
recommending the side to be printed first.
•
Do not mix different types or thicknesses of media in the media
tray at one time; this may cause a jam.
6
Slide the media tray completely into the slot.
Only one PC compatible computer can be directly connected to your printer.
Connecting the printer to a
computer