165
Care and Maintenance
CAUTION:CAUTION:
•If the fuser knob will not turn, do not force it, or you may damage
the fuser. Instead, follow these steps:
a) Unlock the fuser by turning the small green thumbscrew
counterclockwise.
b) Pull the fuser out. The media will probably tear.
c) Remove the oil supply roll.
d) Turn the fuser’s large green knob to release the jammed
media.
e) Remove the jammed media from the fuser and the printer.
SAFETY CAUTION:
•The fuser is hot; to avoid personal injury, turn off the printer and
wait 10 minutes for the fuser to cool before touching it.
3
Close the front door.
To clear media jams in location D with face up printing:
1
a) Open the front door and the right side door.
b) Turn the fuser’s large green knob counterclockwise to
release the jammed media.
c) Remove the jammed media from the right side of the
printer.
2
Close the front door and the right side door.
b
a
c
a