Turning Wi-Fi repeater mode on

Smartphone Connect Setup Guide

1.Using one of the handsets supplied with your phone system, press MMenuN (right soft key) and then press #538.

2.Press MDN or MCN to select “On” and then press MOKN.

Repeater

Off

Important information

RA router is required to use Wi-Fi repeater mode.

If the router function of your wireless router is not enabled and if there is no other routing device connected to your network, Wi-Fi repeater mode will not function.

RThe base unit does not have a router feature.

Wi-Fi repeater mode allows the base unit to function as a wireless access point. It does not replace the functionality of a wireless router, and it does not have a router feature.

Open source software notice

RParts of this product use open source software supplied based on the relevant conditions of the Free Software Foundation’s GPL and/or LGPL and other conditions. Please read all licence information and copyright notices related to the open source software used by this product. This information is available at the following web page: www.panasonic.net/pcc/support/tel/air

At least three (3) years from delivery of this product, Panasonic System Networks Co., Ltd. will give to any third party who contacts us at the contact information provided below, for a charge of no more than the cost of physically distributing source code, a complete machine-readable copy of the corresponding source code and the copyright notices covered under the GPL and the LGPL. Please note that software licensed under the GPL and the LGPL is not under warranty.

www.panasonic.net/pcc/support/tel/air

Software information

RThe End User License Agreement (EULA) for the Smartphone Connect app is available at the following web page:

Panasonic KX-PR2110 KX-PRW120 setup guide Turning Wi-Fi repeater mode on, Important information

Models: KX-PR2110 KX-PRW120