
Installations and connections
Installing the thermal recording paper
Rolling core is upside
Reverse
Slack
1
2
Open the control panel.
Install the recording paper.
Approx. | |
10 | cm |
|
3
4
Pull approximately 10 cm of recording paper out of the unit, and close the control panel by
pressing “ ” down on both sides until it clicks into place.
Approximately 5 cm of recoding paper will be fed out automatically.
Pull the recording paper towards you and tear it off.
When the unit runs out thermal recording paper, the following message will be displayed.
キロクシガアリマセン U20 カミヲ イレテクダサイ
スイショウヒンバン : U G - 0010A 4
Install a new thermal recording paper.
Replacement thermal recording paper:
| ・As of September 2008. | ・Tax included. |
5