Installations and connections
Installing the ink film
1 |
Open the control panel.
Insert the orange gear into the left slot of the main unit.
2 |
3 |
Open the back cover.
Insert the ink film.
Insert the white gear into the right slot of the main unit.
4 If the ink film is slack, tighten it by winding this gear (orange).
5
6
Close the back cover pressing
“
” down on both sides until it clicks into place.
Close the control panel.
When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑがなくなりました U23 交換してください
品番：ＫＸ－ＦＡＮ190
Install a new ink film.
Replacement ink film: | ￥714 |
| |
| ￥1,208 |
・As of February 2007. | ・Tax included. |
4
