Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333 21
Useful Telephone Settings
2Press{v} repeatedly to display
“SETTING BS”, then press {>}.
3Press{3}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 20).
5Press{2}.
6Select the desired setting by pressing {1}
for time break recall or {2} for earth
recall.
LIf you select time break recall, “1-2”
will be displayed and it shows 80 ms.
7Press{>} , then press {ih}.
Setting pause length
1Press{j} .
2Press{v} repeatedly to display
“SETTING BS”, then press {>}.
3Press{3}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 20).
5Press{3}.
6Select the desired setting by pressing {1}
for 3 seconds or {2} for 5 seconds.
7Press{>} , then press {ih}.
Setting call restriction
You can restrict selected handsets from
dialling certain phone numbers. You can
assign up to 10 phone numbers (memory
locations 1–10) to be restricted per handset.
If a restricted number is dialled, the call will
not be connected and the restricted number
will flash on the display. For example,
storing an area code will prevent a handset
from dialling a long distance call.
1Press{j} .
2Press{v} repeatedly to display
“SETTING BS”, then press {>}.
3Press{6}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 20).
LAll the registered handset numbers will
be displayed.
LFlashing numbers indicate call
restriction is turned on for the
corresponding handset.
5Press the desired handset numbers.
LThe selected handset numbers will
flash.
LTo cancel a selected handset number,
press the number again. The number
will stop flashing.
6Press {>}.
7Enter the phone number to be restricted
(8 digits max.).
LIf you enter a number when a
previously stored number is already
displayed, the new number will erase
the old number.
LTo select a different memory location,
press {>} repeatedly and enter a
number.
8Press {>}.
9Press {ih}.
Turning on/off call restriction
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {6}.
4Enter “0000” (default base unit PIN).
LIf you changed PIN, enter it (page 20).
LHandset numbers will be displayed.
Flashing numbers indicate call
restriction is on; non-flashing numbers
indicate call restriction is off.
5Press the desired handset numbers to
turn on/off.
6Press {>}, then press {ih}.